JBL

Amplifiers

Crown XLS1500, Crown XLS2000, Crown XLS1000, Crown XLS2500

Request a quote

Crown’s XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it’s much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Specification:
Sensitivity (for full rated power at 4 ohms) 1.4 Vrms
Frequency Response (at 1 watt, 20 Hz – 20 kHz) +0 dB, –1 dB
Signal-to-Noise Ratio Rated as dBr to full rated 8Ω power output (A-Weighted):
XLS1000 > 97 dB
XLS1500, XLS2000, XLS2500 > 103 dB
Damping Factor (8 ohm): 10 Hz to 400 Hz > 200
Crosstalk (below rated 8Ω power) At 1kHz: > 85dB
At 20kHz: >55dB
Input Impedance (nominal) 20 kΩ balanced, 10 kΩ unbalanced
Load Impedance 2 to 8 Ω per channel in Stereo
4 to 8 Ω in Bridge Mono
AC Line Voltage and Frequency Configurations Available (± 10%) 120 VAC 60 Hz
100 VAC 50/60 Hz
220 and 240 VAC 50 Hz
Ventilation Flow-through ventilation from front to back
Cooling Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
Air Volume Requirements (per minute per unit) 80.15 ft³ (2.27 m³)
Integrated Processing
  • PureBand™ Crossover System
  • Crossover Filter: Linkwitz-Riley 24dB per Octave
  • Crossover Frequency Range: 50 HZ – 3 kHz
  • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).
  • Peakx™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers
Input/Output
  • Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
  • Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector.
  • One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
Construction XLS1000/XLS1500: 8.12-Inch (20.62cm) depth
XLS2000/XLS2500: 10.35-Inch (26.29cm) depth
Dimensions EIA Standard 19-inch (48.3-cm) rack mount width
(EIA RS-310-B), 3.5-inch (8.9-cm) height.
XLS 1000/1500: 7.7-inch (19.6-cm) depth.
XLS 2000/2500: 10.7-inch (27.2-cm) depth.
Net Weight, Shipping Weight XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)

DOWNLOAD MORE SPECIFICAITONS

Crown CTs 600

Request a quote

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

DOWNLOAD SPECIFICAITONS

Speakers

JBL 8350

Request a quote

The 8350 Cinema Surround Speaker offers very high power handling, high sensitivity, and extended bass response in a very compact enclosure. The twoway 8350’s reliability and performance features position it as the ideal high power surround for the extended dynamic range reuiqred by digital sound formats.

Specification:
Frequency Range (-10 dB) 60 Hz – 19 kHz
Frequency Response (±3 dB) 75 Hz – 17 kHz
Power Rating 350 watts continuous
pink noise
1400 watts peak
Sensitivity (1W/1m) 99 dB-SPL half-space / wall-mounted
97 dB-SPL free-field
Maximum Peak SPL 130 dB/1m
Nominal Impedance 8 ohms
Hor. Coverage Angle (-6 dB) 100° averaged 400 Hz to 12 kHz
Vert. Coverage Angle (-6 dB) 80° averaged 400 Hz to 12 kHz
Directivity Factor (Q) 7 averaged 400 Hz to 12 kHz
Directivity Index (DI) 8.4 dB averaged 400 Hz to 12 kHz
Crossover Frequency 1.4 kHz
High Frequency Contour ISO2969 Curve X surround contour
Polarity EIA (Positive voltage to RED terminal gives forward cone motion)
Low Freq Transducer
Nominal 250 mm (10 in)
Diameter 64 mm (2.5 in) voice coil
High Freq Transducer
Nominal 25 mm (1 in) exit
Diameter 38 mm (1.5 in) voice coil
Downward Firing Nominal 20° when mounted flush on back
Angle panel
Enclosure Material Textured Black H.I.P.S. Plastic
Grille Color Black
Input Connectors 5-way binding posts
Dimensions (H x W x D) 457 mm x 457 mm x 260 mm
(18 in x 18 in x 10.25 in)
Net Weight 9.5 kg (21 lb)

JBL JRX125

Request a quote

The JRX125 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.

Specification:
Power Rating 500 W / 2000 W
Frequency Range 36 Hz – 16 kHz (-10 dB)
Dimensions (H x W x D) 1099 mm x 464 mm x 432 mm
(43.25 in x 18.25 in x 17 in)
Frequency Response 45 Hz – 12 kHz (±3 dB)
Sensitivity 100 dB SPL (1W/1m)
Nominal Impedance 4 ohms
Recommended Amplifier Power 500 W to 1000 W into 4 ohms
Maximum SPL 133 dB
Nominal Dispersion 90º x 50º
Crossover Frequency 2 kHz
Weight 42.6 kg (94 lb)
High Frequency Driver JBL 2412 1 in exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver JBL M128 x 2
Input Connectors Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

JBL 3732

Request a quote

The 3732 ScreenArray features true three-way system design enhanced for critical film sound reproduction in small to medium cinemas environments

Specification:
Frequency Range 30 Hz – 20 kHz
Frequency Response 40 Hz – 19 kHz (±3 dB)
System Sensitivity 103 dB, 2.83V
@ 1m (3.3 ft)
Rated Maxium SPL 125 dB @ 1m (3.3 ft), 131 dB peak
System Input Power Rating 3732: LF: 500 W, M/HF: 150 W 3732-T: HF: 85 W
Hor. Coverage Angle 90° (-6 dB)
Vert. Coverage Angle 20° up, 30° down (-6 dB)
Directivity Factor (Q) 10.0
Directivity Index (DI) 10 dB
Crossover Frequencies 3732: 350 Hz
3732-T: 1.2 kHz
Dimensions (H x W x D) 1937 x 762 x 450 mm
76.3 x 30 x 17.75 in)
Net Weight 77.9 kg (172 lbs)
Shipping Weight 92.8 kg (205 lbs)

JBL 4732

Request a quote

The 4732 ScreenArray features true three-way system design enhanced for critical film sound reproduction in medium to large cinemas environments

Specification:
Frequency Range 30 Hz – 20 kHz
Frequency Response 40 Hz – 19 kHz (±3 dB)
System Sensitivity 107 dB, 2.83V
@ 1m (3.3 ft)
Rated Maxium SPL 130 dB @ 1m (3.3 ft), 136 dB peak
System Input Power Rating 4732: LF: 800 W, M/HF: 200 W
4732-T: HF: 85 W
Hor. Coverage Angle 90° (-6 dB)
Vert. Coverage Angle 20° up, 30° down (-6 dB)
Directivity Factor (Q) 10.0
Directivity Index (DI) 10 dB
Crossover Frequencies 4732: 250 Hz
4732-T: 1.2 kHz]
Dimensions (H x W x D) 2427 x 762 x 450 mm
(95.6 x 30 x 17.75 in)
Net Weight 84.4 kg (186 lbs)
Shipping Weight 103.5 kg (228 lbs)

JBL 4722/4722N

Request a quote

The 4722 provides smooth and accurate reproduction of cinema soundtracks in a compact and very cost effective system

Specification:
Frequency Range 30 Hz – 20 kHz
Frequency Response 40 Hz – 19 kHz (±3 dB)
Sensitivity 104dB, 2.83V @ 1m (3.3ft)
Nominal Impedance 4722N: 4 Ohms
4722: HF 8 ohms
4722: LF 4 ohms
Rated Maxium SPL 130 dB @ 1m (3.3 ft), 136 dB peak
Bi-amp System Input Power Rating LF: 808W HF: 85W
Crossover Frequencies 4722: 630Hz
4722N: 800Hz
Dimensions (H x W x D) 1265 x 762 x 450mm
(49.9 x 30 x 17.75in)
Net Weight 55.8 kg (123 lbs)
Shipping Weight 65.4 kg (144 lbs)
4739 Low Frequency 2 x 26SH-1 380 mm (15 in) dia.,
76 mm (3 in) edgewound ribbon
voice coil transducers mounted
in 4509 LF enclosure
Net Weight 48.6 kg (107 lbs)
Shipping Weight 55.4 kg (122 lbs)
4722-HF High Frequency Pack One 2432H compression driver, One
2384 horn, one adjustable bracket
Net Weight 7.3 kg (16 lbs)
Shipping Weight 12.7 kg (28 lbs)

JBL 8320

Request a quote

The 8320 Cinema Surround Speaker offers high power handling, high sensitivity, and extended bass response in a very compact enclosure. The twoway 8320’s reliability and performance features position it as the ideal low cost, compact surround for the extended dynamic range required by digital sound formats.

Specification:
Frequency Range 50 Hz – 20 kHz
Frequency Response (±3 dB) 465 Hz – 18 kHz
Power Rating 150 watts continuous
pink noise
600 watts peak
Sensitivity (1W/1m) 94 dB-SPL half-space / wall-mounted
91 dB-SPL free-field
Maximum Peak SPL 122 dB/1m
Nominal Impedance 8 ohms
Hor. Coverage Angle (-6 dB) 100° averaged 400 Hz to 12 kHz
Vert. Coverage Angle (-6 dB) 90° averaged 400 Hz to 12 kHz
Directivity Factor (Q) 7 averaged 400 Hz to 12 kHz
Directivity Index (DI) 8.4 dB averaged 400 Hz to 12 kHz
Crossover Frequency 3 kHz
High Frequency Contour ISO2969 Curve X surround contour
Polarity EIA (Positive voltage to RED terminal gives forward cone motion)
Low Freq Transducer
Nominal 200 mm (8 in)
Diameter 38 mm (1.5 in) voice coil
High Freq Transducer
Nominal 25 mm (1 in) exit
Diameter 25 mm (1 in) voice coil
Downward Firing Angle Nominal 20° when mounted flush on back panel
Enclosure Material Textured Black H.I.P.S. Plastic
Grille Color Black
Input Connectors 5-way binding posts
Dimensions (H x W x D) 406 mm x 343 mm x 224 mm
16 in x 13.5 in x 8.8 in
Net Weight 5.0 kg (11 lb)

JBL 4670D

Request a quote

The 4670D provides powerful, smooth and accurate reproduction of cinema soundtracks from a compact and cost effective system

Specification:
Frequency Range 34 Hz – 20 kHz (-10 dB)
Frequency Response 40 Hz – 16 kHz (±3 dB)
Power capacity 600 W continuous pink noise
Sensitivity 100 dB 1 W (2.83V) 1 m (3.3 ft)
Nominal Impedance 4 ohms
Crossover Frequency 800 Hz
Nominal coverage 90° horizontal, 40° vertical
Half-space reference efficiency 6.3%
Maximum continuous acoustical power output 28 acoustic W (sine wave input)
System polarity Positive voltage to red terminal produces forward cone motion
Input connector Color-coded push terminals
High frequency output connector Color-coded push terminals

JBL 8340A

Request a quote

High Power Cinema Surround Speaker for Digital Applications

Specification:
Frequency Range 45 Hz – 18 kHz (-10 dB)
Frequency Response 75 Hz – 16 kHz (±3 dB)
Power Rating 250 watts continuous pink noise, 1000 watts peak
Sensitivity 96 dB SPL, 1W @ 1m (3.3 ft)
Nominal Impedance 8 ohms
Hor. Coverage Angle (-6 dB) 100° averaged 400 Hz to 12 kHz
Vert. Coverage Angle (-6 dB) 80° averaged 400 Hz to 12 kHz
Directivity Factor (Q) 7 averaged 400 Hz to 12 kHz
Directivity Index (DI) 8.4 dB averaged 400 Hz to 12 kHz
Crossover Frequency 2.2 kHz
High Frequency Contour ISO2969 Curve X surround contour
Polarity EIA (Positive voltage to RED terminal gives
Low Frequency Transducer
Nominal Diameter
250 mm (10 in)
High Frequency Transducer
Nominal Diameter
25 mm (1 in)
Downward Firing Angle Nominal 20° when mounted flush on back panel
Enclosure Material Textured Black H.I.P.S. Plastic
Grille Color Black
Input Connectors 5-way binding posts
Dimensions (H x W x D) 457 mm x 457 mm x 260 mm (18 in x 18 in x 10.25 in)
Net Weight 8.6 kg (19 lb)

JBL SRX725

Request a quote

For the ultimate in performance and simplicity, a pair of SRX725 speakers, and a single, high-power amplifier delivers superb high-level music and powerful bass.

Specification:
Power Rating 1200 W / 2400 W / 4800 W
Frequency Range 37 Hz – 20kHz (-10 dB)
Dimensions (H x W x D) 1219 mm x 541 mm x 508 mm
(48 in x 21.3 in x 20 in)
Frequency Response 53 Hz – 20 kHz (±3 dB)
Coverage Pattern 75º x 50º nominal
Net Weight 45 kg (100 lb.)

JBL VRX932LA-1

Request a quote

The VRX932LA-1 is a light-weight (46 lb / 21 kg) compact 12″ two-way line array speaker system designed for use in arrays of up to six units.

Specification:
Power Rating 800 W / 1600 W / 3200 W
Frequency Range 57 Hz – 20 kHz (-10 dB)
Dimensions (H x W x D) 343 mm x 597 mm x 376 mm
(13.5 in x 23.5 in x 14.8 in)
Frequency Response 75 Hz – 20 kHz (±3 dB)
Coverage Pattern 100 x 15 nominal
Crossover Modes Bi-amp / passive, externally switchable
Crossover Frequency 132 dB SPL peak 1.2 kHz
System Maximum SPL Passive: 130 dB SPL peak , Bi-amp LF: 130 dB SPL peak
System Sensitivity (1w @ 1m) Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
LF Driver 1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with neodymium magnet, dual voice-coils, and dual magnetic gaps.
HF Driver 3 x JBL 2408J, 38 mm (1.5 in) voice-coil, neodymium compression driver
Nominal Impedance Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
Active Tunings Tunings available at www.jblpro.com
Enclosure 18 mm, 11-ply birch plywood
Suspension / Mounting Optional VRX932LA-AF line array frame kit
Finish Black DuraFlex™ finish
Grille Power coated, black, 16-guage perforated steel with with acoustically transparent foam
Input Connectors Neutrik® Speakon® NL-4 (x2)
Net Weight 21 kg (46 lb)
Optional Accessories VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole, 41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only

Subwofers

JBL 4641

Request a quote

The JBL Model 4641 is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducer mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4641 is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.

Low Frequency Transducer

Specification:
Transducer JBL Model 2241H
460 mm (18 in)
Rated Impedance 8 ohms
Minimum Impedance 6.3 ohms
Continuous Pink Noise 600 Watts
Continuous Program 1200 Watts
Peak Power 2400 Watts
Axial Sensitivity 50 Hz to 500 Hz; 98 dB, 1W @ 1m
40 Hz to 100 Hz; 97 dB, 1W @ 1m
At -10 dB power (60 W) 0.8 dB
At -3 dB power (300 W) 2.6 dB
At rated power (600 W) 4.3 dB
Recommended Crossover Frequencies High-pass: 20 Hz, 24 dB/octave or greater
Low-pass: 80 Hz to 150 Hz, 12 dB/octave or greater
Net Weight 60 kg (131 lbs.)
Dimensions H x W x D 1010 mm x 674 mm x 450 mm
39.75 in x 26.5 in x 17.75 in

JBL 4642A

Request a quote

The JBL Model 4642A is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducers mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4642A is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.

Specification:
Rated Impedance J4 ohms
Minimum Impedance 3.2 ohms
Continuous Pink Noise 1200 Watts
Continuous Program 2400 Watts
Peak Power 4800 Watts
Axial Sensitivity 50 Hz to 500 Hz; 101 dB, 1W @ 1m
40 Hz to 100 Hz; 100 dB, 1W @ 1m
Net Weight 60 kg (131 lbs.)
Dimensions H x W x D 1010 mm x 674 mm x 450 mm
39.75 in x 26.5 in x 17.75 in

JBL 4645C

Request a quote

The JBL Model 4645C is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducer mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4645C is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.

Specification:
Rated Impedance 8 ohms
Minimum Impedance 7.2 ohms
Continuous Pink Noise 800 Watts
Continuous Program 1600 Watts
Peak Power 3200 Watts
Axial Sensitivity 50 Hz to 500 Hz; 99 dB, 1W @ 1m
40 Hz to 100 Hz; 97 dB, 1W @ 1m
At -10 dB power (80 W) 0.6 dB
At -3 dB power (400 W) 2.0 dB
At rated power (800 W) 3.3 dB
Net Weight 63 kg (138 lbs.)
Dimensions H x W x D 1010 mm x 674 mm x 450 mm
39¾ in x 26½ in x 17¾ in

JBL SRX728S

Request a quote

The SRX728S is a high power subwoofer system containing two 2268H neodymium magnet, patented* Differential Drive®, 18″ woofers in a front-loaded, vented enclosure.

Specification:
Power Rating 1600 W / 3200 W / 6400 W
Frequency Range 27 Hz – 220 Hz (-10 dB)
Dimensions (H x W x D) 610 mm x 1067 mm x 838 mm
(24 in x 42 in x 33 in)
Frequency Response 33 Hz – 220 kHz (±3 dB)
Net Weight 76 kg (166.5 lb.)